For your motor and engine to run steadily while protecting the delicate parts from rusting, it is essential to provide your vehicles with high quality engine oil. Formulated and produced with the state-of-art technology, Suzuka Engine Oil consists of a variety of API standard compliant products which are best for your automobiles.
Suzuka Engine Oil - Economy Range
SUZUKA 0W-20 SN FULL SYNTHETIC
Suzuka 0W-20 SN Full Synthetic Engine Oil is a high performance, extreme fuel-economy oil for a variety of vehicles with or without extended service intervals and formulated with fully-synthetic base oils. It provides excellent cold starting and low oil consumption. Suzuka 0W-20 SN Full Synthetic Engine Oil provides superior engine protection under all driving conditions and specifically formulated to provide extra protection against the harmful effects of city driving, where cars undergo a higher stress due to constant stopping and going.
Features / Benefits
- Protects engines under all driving conditions
- Lowers friction and improves gas mileage
- Provides longer engine life
- Protects against rust, corrosion and varnish
- Resists thermal break-down
Applications
Suzuka 0W20 SN Full Synthetic Engine Oil meets requirements of API SN service. It meets or exceeds the demanding requirements of International Lubricant Standardization and Approval Committee (ILSAC) GF-5 (Use ILSAC GF-5 where GF-1 through GF-4 are recommended). ILSAC GF-5 comprises the latest standard for passenger car, van, light truck and sport utility vehicles motor oils.
This product is also recommended for older engines, which owner’s manual calls for API SN, SM, SL Service Classifications or any combination thereof. Viscosity recommendations vary according to temperature and engine manufacturer.
The latest technologies of SUZUKA Oil, Japan enable Suzuka 0W-20 SN Full Synthetic engine oils to exceed the requirements of such car manufacturers and suitable for Honda, Ford, Toyota, Subaru and hybrid cars where CO2 reduction is important.
Meets the following OEM requirements:
- GM 6094M (for GM vehicles produced prior to 2011)
*FOR THE PROPER FLUID FOR YOUR EQUIPMENT*
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
SAE Viscosity Grade | SAE J300 | 0W-20 |
Flash Points °C | ASTM D-92 | 217 |
Pour Point °C | ASTM D-97 | -38 |
Colour | ASTM D-1500 | 3.0 |
Viscosity Index | ASTM D-2270 | 158 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 36.40 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 7.10 |
SUZUKA 5W-40 SN FULL SYNTHETIC
Suzuka 5W-40 SN Full Synthetic Engine Oil is a high performance, extreme fuel-economy oil for a variety of vehicles with or without extended service intervals, formulated with fully-synthetic base oils. it provides excellent cold starting and lower oil consumption. Suzuka 5W-40 SN Full Synthetic Engine Oil provides superior engine protection under all driving conditions and specifically formulated to provide extra protection against the harmful effects of city driving, where cars undergo a higher stress due to constant stopping and going.
Features/ Benefits
- Protects engines under all driving conditions
- Lowers friction and improves gas mileage
- Provides longer engine life
- Protects against rust, corrosion and varnish
- Resists thermal break-down
Applications
5W-40 Full Synthetic Engine Oil meets requirements of API SN API SN/CF ACEA C3-12 service category.This product is also recommended for older engines, which owner’s manual calls for API SN, SM, SL, and CF Service Classifications or any combination thereof. Viscosity recommendations vary according to temperature and engine manufacturer.
The latest technologies of SUZUKA Oil, Japan enable oils manufactured by the company to exceed the requirements of such car manufacturers as TOYOTA, LEXUS, NISSAN, MAZDA, MITSUBISHI, HONDA, SUZUKI, SUBARU, DAIHATSU, HYUNDAI, KIA, FORD, FIAT, AUDI, VOLVO and others.
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
SAE Viscosity Grade | SAE J300 | 5W-40 |
Flash Point °C | ASTM D-92 | 210 |
Pour Point °C | ASTM D-97 | -36 |
Colour | ASTM D-1500 | 2.50 |
Viscosity Index | ASTM D-2270 | 164 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 91.64 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 14.50 |
SUZUKA 10W-40 SN SEMI SYNTHETIC
Suzuka 10W-40 SN Semi Synthetic Engine Oil provides high quality engine protection under all driving conditions and is formulated with semi synthetic base stocks and a premium additive package to provide extra protection against the harmful effects of city driving, where cars undergo a higher stress due to constant stopping and going. Its low friction formula helps improve gas mileage for long engine life and helps protect against rust, corrosion, startup wear, varnish build-up, and eliminates the need for extra oil additives. It also protects against thermal breakdown which helps prevent stuck rings.
Features / Benefits
- Protects engines under all driving conditions
- Lowers friction and improves gas mileage
- Provides longer engine life
- Protects against rust, corrosion and varnish
- Resists thermal break-down
Applications
10W-40 Semi Synthetic Engine Oil meets requirements of API SN/CF service. This product is also recommended for older engines, which owner’s manual calls for API SN, SM, SL, SJ, SH, SG, SF, SE Service Classifications or any combination thereof. Viscosity recommendations vary according to temperature and engine manufacturer.
The latest technologies of Suzuka Oil, Japan enable oils manufactured by the company to meet and exceed the requirements of most Japanese, American and European Original Equipment Manufacturers (OEM), including: TOYOTA, LEXUS, NISSAN, MAZDA, HONDA, SUZUKI, MITSUBISHI, SUBARU, DAIHATSU, ISUZU, GM, MERCEDES-BENZ, RENAULT, FIAT, SSANGYONG, HYUNDAI, KIA and others.
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID
FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
SAE Viscosity grade | SAE J300 | 10W-40 |
Flash point °C | ASTM D-92 | 228 |
Pour point °C | ASTM D-97 | -42 |
Colour | ASTM D-1500 | 2.5 |
Viscosity index | ASTM D-2270 | 162 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 90.20 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 14.20 |
SUZUKA 10W-50 SM/CF PREMIUM MOTOR OIL
Suzuka 20W-50 SM/CF Premium Mineral Engine Oil provides high quality engine protection under all driving conditions and is specifically formulated to provide extra protection against the harmful effects of city driving, where cars undergo a higher stress due to constant stopping and going.
Suzuka 20W-50 SM/CF Mineral Engine Oil low friction formula helps improve gas mileage for long engine life and helps protect against rust, corrosion, startup wear, varnish build-up, and eliminates the need for extra oil additives. It also protects against thermal breakdown which helps prevent stuck rings.
Features / Benefits
- Protects engines under all driving conditions
- Lowers friction and improves gas mileage
- Provides longer engine life
- Protects against rust, corrosion and varnish
- Resists thermal break-down
Applications
Suzuka 20W-50 Mineral Engine Oil meets performance requirements of API SM/CF service category. This product is also recommended for older engines, which owner’s manual calls for API SM, SL, SJ, SH, SG, SF, SE Service Classifications or any combination thereof. Viscosity recommendations vary according to temperature and engine manufacturer.
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID
FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
SAE Viscosity grade | SAE J300 | 20W-50 |
Flash point °C | ASTM D-92 | 223 |
Pour point °C | ASTM D-97 | -26 |
Colour | ASTM D-1500 | 4.5 |
Viscosity index | ASTM D-2270 | 131 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 154.60 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 18.20 |
SUZUKA 10W-40 SM/CF PREMIUM MOTOR OIL
Suzuka 10W-40 SM/CF Premium Mineral Engine Oil provides high quality engine protection under all driving conditions and is specifically formulated to provide extra protection against the harmful effects of city driving, where cars undergo a higher stress due to constant stopping and going.
Suzuka 10W-40 SM/CF Mineral Engine Oil low friction formula helps improve gas mileage for long engine life and helps protect against rust, corrosion, startup wear, varnish build-up, and eliminates the need for extra oil additives. It also protects against thermal breakdown which helps prevent stuck rings.
Features / Benefits
- Protects engines under all driving conditions
- Lowers friction and improves gas mileage
- Provides longer engine life
- Protects against rust, corrosion and varnish
- Resists thermal break-down
Applications
Suzuka 10W-40 Mineral Engine Oil meets performance requirements of API SM/CF service category. This product is also recommended for older engines, which owner’s manual calls for API SM, SL, SJ, SH, SG, SF, SE Service Classifications or any combination thereof. Viscosity recommendations vary according to temperature and engine manufacturer.
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID
FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
Viscosity grade | SAE J300 | 10W-40 |
Flash point °C | ASTM D-92 | 210 |
Pour point °C | ASTM D-97 | -24 |
Colour | ASTM D-1500 | 4.5 |
Viscosity index | ASTM D-2270 | 154 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 92.90 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 14.0 |
SUZUKA 15W-40 MOTOR OIL
Suzuka 15W-40 SM/CF Mineral Engine Oil provides high quality engine protection under all driving conditions and is specifically formulated to provide extra protection against the harmful effects of city driving, where cars undergo a higher stress due to constant stopping and going.
Suzuka 15W-40 SM/CF Mineral Engine Oil low friction formula helps improve gas mileage for long engine life and helps protect against rust, corrosion, startup wear, varnish build-up, and eliminates the need for extra oil additives. It also protects against thermal breakdown which helps prevent stuck rings.
Features / Benefits
- Protects engines under all driving conditions
- Lowers friction and improves gas mileage
- Provides longer engine life
- Protects against rust, corrosion and varnish
- Resists thermal break-down
Applications
Suzuka 15W-40 Mineral Engine Oil meets performance requirements of API SM/CF service category. This product is also recommended for older engines, which owner’s manual calls for API SM,SL, SJ, SH, SG, SF, SE Service Classifications or any combination thereof. Viscosity recommendations vary according to
temperature and engine manufacturer.
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
SAE Viscosity grade | SAE J300 | 15W-40 |
Flash point °C | ASTM D-92 | 210 |
Pour point °C | ASTM D-97 | -24 |
Colour | ASTM D-1500 | 4.5 |
Viscosity index | ASTM D-2270 | 154 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 92.90 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 14.0 |
SUZUKA 10W-30 CI-4/SL SEMI SYNTHETIC DIESEL ENGINE OIL
Suzuka 10W-30 CI-4/SL Premium grade diesel engine oil provides excellent protection for newer, high performance engines that are used in the toughest on road and off road applications. Shown to be versatile as well as able to meet the grueling demands of today’s low emission diesel engines, as well as the older models which are using both low and high sulfur fuels. Recommended for use in a variety of heavy duty uses as well as operating environments.
Meets the API CI4/SL specification for gasoline & diesel engines that are used in mixed fleets.
Features / Benefits
- Performs well in low emission diesel engines which increase the demands on engine lubricants.
- Delivers the best performance in these late model engines, as well as older engines.
- Excellent soot handling capabilities.
- Exemplary thermal stability and oxidation control.
- Contains properties which provide anti-wear and anti-scuff.
- Contains extended TBN reserves which provide improved acid neutralization and corrosion protection.
- Maximizes oil flow to the critical bearing surfaces during start up.
- Has stay-in-grade sheer stability.
- Extended drain capabilities- excellent water tolerance.
- Excellent deposit control, oil oxidation resistance, wear and rust control in gasoline and diesel
Applications
- On the highway applications for light and heavy duty trucking.
- Off the highway applications such as trucking, construction, agriculture and quarrying.
- Various mixed fleet applications.
Meets Performance Requirements:
- API CI-4 PLUS,CI-4/SL
- ACEA E2, E5, E3
- ACEA A3/B3
- JASO DH-1
- MACK EO-M PREMIUM PLUS
- MACK EO-L
- CUMMINS CES 20077, 20076, 20075, 20072, 20071
- VOLVO VDS-2, VDS-3
- CATERPILLAR ECF-1
- MB 228.0, MB 228.3
- VW 501, 505
- MAN 271
- MTU TYPE 1
- RVI E2 R
- DDA 93K214
* ALWAYS CONSULT YOUR OWNER’S MANUAL FOR THE PROPER FLUID
FOR YOUR EQUIPMENT *
Technical characteristics
Item | Method | Result |
SAE Viscosity grade | SAE J300 | 10W-30 |
Flash point °C | ASTM D-92 | 217 |
TBN (mg KOH/g) | ASTM D-28967 | 9.6 |
Pour point °C | ASTM D-97 | -21 |
Colour | ASTM D-1500 | 4.5 |
Viscosity index | ASTM D-2270 | 141 |
Kinetic Viscosity 40°C (cSt) | ASTM D-445 | 65.80 |
Kinetic Viscosity 100°C (cSt) | ASTM D-445 | 15.20 |