Suzuka Engine Oil

For your motor and engine to run steadily while protecting the delicate parts from rusting, it is essential to provide your vehicles with high quality engine oil. Formulated and produced with the state-of-art technology, Suzuka Engine Oil consists of a variety of API standard compliant products which are best for your automobiles.

SUZUKA 10W-60 SN FULLY SYNTHETIC RACING OIL

Suzuka Full Synthetic 10W-60SN is under the base oil group of ester and Group IV (PAO) which have been purified together with our own unique additive agent that meets the latest API service standards.

Application

Suzuka 10W-60SN Full Synthetic Racing Oil is equipped for naturally aspirated engine and forced induction engine using mixed gas and other functions that increase the level of anti-lag system (ALS), or other thermal stress, and is therefore developed for intended use in high-speed sports cars and racing cars.

Specification/ Approval and authorization

Conformed standard

  • API SN

Usage effect/result

With high viscosity and low oil consumption, Suzuka 10W-60SN Full Synthetic Racing Oil suitable for all seasons, has the following features:

  • The ester and PAO constructed base oil PAO exhibits stable performance in a wide temperature range
  • Protects the engine in harsh operating conditions of racing, tournaments, and etc.
  • Maintains proper oil pressure to operating temperature of the engine
  • Excellent oil film strength
  • It is highly resistant to degradation due to mechanical stability by heat

The state-of-the-art technology of Japan’s SUZUKA OIL, which the company has developed meets the OEM standards of TOYOTA, LEXUS, NISSAN, MAZDA, MITSUBISHI, HONDA, SUZUKI, SUBARU, DAIHATSU, FORD, AUDI, BMW, MB, PORSCHE , etc. .

Technical characteristics

Item  Method  Result 
Viscosity grade SAE J300 10W-60
Density ASTM D-40520 8621
Flash point °C ASTM D-92 246
TBN (mg KOH/g) ASTM D-28967 10,00
Pour point °C ASTM D-97 -42
Color ASTM D-1500 3,0
Viscosity index ASTM D-2270 173
Kinetic Viscosity 40°C (cSt) ASTM D-445 165,70
Kinetic Viscosity 100°C (cSt) ASTM D-445 23,69

SUZUKA 5W-40 SN FULLY SYNTHETIC

Suzuka 5W-40SN Full Synthetic Engine Oil is an advanced fully synthetic engine oil formulated with base oil of Group IV PAO (Polyalphaolefins) and Group III, which are purified using a patented technology. As a result, the base oil’s anti-oxidant (action of suppressing the formation of sludge in various parts of the engine) is high, and performance remains stable even at low temperatures. The addition of high quality cleaning agent and other additives further enhances the performance of the product.

Application

Suzuka 5W-40SN Full Synthetic Engine Oil is applicable to gasoline engines, turbo/non-turbo, as well as, DOHC/direct fuel injection engine in the latest types of vehicle. This product contains necessary sulfate minerals, phosphorus, and low sulphur for the engine making it suitable for all seasons. The product’s performance and environmental quality has achieved not only the strict standards of America and Europe but also of automobile manufacturers around the world, including the latest standards of API, MERCEDES-BENZ, BMW, PORSCHE, and VW.

Specification/ Approval and authorization

Conformed standard

  • API SN
  • PORSCHE
  • BMW Longlife-04
  • MB-Approval 229.31
  • VW 502.00/505.00

Usage effect/result

With high viscosity and low oil consumption, Suzuka 5W-40SN Full Synthetic Racing Oil is for all seasons and has the following features:

  • Level of OEM (original equipment manufacturer) specification quality
  • Due to the use of base oil of Polyalphaolefins group, the product remains stable over a wide temperature range
  • Excellent anti-oxidizing characteristics
  • Good fuel consumption efficiency for long distance driving
  • Strong against rust and suppresses carbon sediment (sludge) to the fullest
  • Even below freezing point of over 42 degrees, start up is easy

The state-of-the-art technology of Japan’s SUZUKA OIL which the company has developed meets the criteria of automobile manufacturers such as TOYOTA, LEXUS, NISSAN, MAZDA, MITSUBISHI, HONDA, SUZUKI, SUBARU, DAIHATSU, HYUNDAI, KIA, FORD, FIAT, AUDI, VOLVO, etc.

Technical characteristics

Item Method Result 
Viscosity grade SAE J300 5W-40
Density ASTM D-40520 8549
Flash point °C ASTM D-92 233
TBN (mg KOH/g) ASTM D-28967 70
Pour point °C ASTM D-97 -42
Color ASTM D-1500 <3,0
Viscosity index ASTM D-2270 172
Kinetic Viscosity 40°C (cSt) ASTM D-445 87,55
Kinetic Viscosity 100°C (cSt) ASTM D-445 14,47

SUZUKA 10W-40 SN SEMI SYNTHETIC

SUZUKA 10W-40 SN Semi Synthetic engine oil is developed for engines that uses petrol, utilizing high-quality synthetic components and additive agents added to the well-balanced base oil to achieve high performance. This product is compliant with the latest API service standard (American Petroleum Institute), has excellent wear resistance for engines, and also reduces the formation of sludge in the engine parts.

Application

SUZUKA 10W-40 SN Semi Synthetic engine oil meets the requirements for gasoline-fueled engines of the direct injection type that are equipped with the variable valve timing system, as well as for vehicles equipped with a turbo/non-turbo engine. It also complies with the latest environmental standards. By extending the service life of the catalytic converter, the engine is protected in high load situations during start-stop mode. Suitable for use in all seasons.

Specification/ Approval and authorization

Conformed standard

  • API SN

Usage effect/result

SUZUKA 10W-40 SN Semi Synthetic engine oil is features the following.

  • Minimize the consumption of oil in combustion chamber
  • For all types catalytic converter
  • Increases durability of engine’s life
  • Durable for long distance driving
  • To maintain cleanliness of engine
  • Protects oil seal

The state-of-the-art technology of Japan’s SUZUKA OIL, which the company has developed satisfies the criteria of Japanese and American automobile manufacturers, as well as the OEM (Original Equipment Manufacturer)  standards for TOYOTA, LEXUS, NISSAN, MAZDA, HONDA, SUZUKI, MITSUBISHI, SUBARU, DAIHATSU, ISUZU, GM, MERCEDES-BENZ, RENAULT, FIAT, SSANGYONG, HYUNDAI, KIA , etc.

Technical characteristics

Item  Method  Result 
Viscosity grade SAE J300 10W-40
Density ASTM D-40520 8647
Flash point °C ASTM D-92 224
TBN (mg KOH/g) ASTM D-28967 60
Pour point °C ASTM D-97 -36
Color ASTM D-1500 3,0
Viscosity index ASTM D-2270 158
Kinetic Viscosity 40°C (cSt) ASTM D-445 93,31
Kinetic Viscosity 100°C (cSt) ASTM D-445 14,30

SUZUKA 5W-30 SN ILSAC GF-5 SEMI SYNTHETIC

Suzuka Full Synthetic 5W-30 SN ILSAC GF-5 Semi Synthetic engine oil is made from high quality base oil that increases the balance of various components, leading to high performance and acting as a resource for the maintenance of gasoline engine oil. This product conforms to the latest GF-5 standard that has been regulated by ILSAC (International Lubricants Standardization and Approval Committee).

Application

SUZUKA Full Synthetic 5W-30 SN ILSAC GF-5 Semi Synthetic engine oil is suitable all season for the latest passenger vehicle, SUV, bus, light truck, etc. that use petrol engine. This product is suitable for a direct injection type vehicle engine (GDI, D-4, FSI, T-FSI, CGI, HPI, etc.), a variable engine equipped with a valve timing system or a turbocharger type engine.

Specification/ Approval and authorization

Conformed standard

  • API SN
  • ILSAC GF-5

Usage effect/result

SUZUKA Full Synthetic 5W-30 SN ILSAC GF-5 Semi Synthetic is features the following.

  • Easy engine start-up in winter
  • Good fuel efficiency
  • Long service life of catalytic converter
  • Keeps engine valve clean
  • Extended operation life of engine
  • Protects the seal
  • Meets the latest environmental standards

As a result of the state-of-the-art technology of Japan’s SUZUKA OIL , this product fulfills the standards of automotive manufacturers such as  TOYOTA, LEXUS, NISSAN, HONDA, MAZDA, MITSUBISHI, SUZUKI, SUBARU, DAIHATSU, HYUNDAI, GM, FORD, MERCEDES-BENZ, etc.

Technical characteristics

Item  Method  Result 
Viscosity grade SAE J300 5W-30
Density ASTM D-40520 8690
Flash point °C ASTM D-92 215
TBN (mg KOH/g) ASTM D-28967 70
Pour point °C ASTM D-97 -39
Color ASTM D-1500 <39
Viscosity index ASTM D-2270 162
Kinetic Viscosity 40°C (cSt) ASTM D-445 64,31
Kinetic Viscosity 100°C (cSt) ASTM D-445 10,98

SUZUKA 10W-40 MOTOR OIL SM/CF

Suzuka 10W-40 Motor Oil SM / CF is manufactured with highly purified base oil and high viscosity mineral oil used for the gasoline engine. In order to suppress the influence of aromatic hydrocarbon such as benzene contained in an unstable gasoline, this product is strengthened by the use of high quality detergents and dispersing additives. This product also contains high anti-oxidation properties. Suitable for use in all seasons.

Application

Suzuka 10W-40 Motor Oil Oil SM / CF takes priority at/is at the forefront of being suited for performance at various temperature ranges. This product satisfies current temperature standards for turbocharged direct injection and catalytic converters since 2005 ● It complies with the vehicle standards of the engine. It can also be used on an integrated gear box equipped in four-cycle motorcycles ● usage on engine is possible. Performance and environmental quality of this product have met the standards of JASO and API.

Specification/ Approval and authorization

Conformed standard

  • API SM/CF
  • JASO MA

Usage effect/result

SUZUKA 10W-40 Motor Oil SM/CF is high quality featuring the following characteristics.

  • Stable performance throughout the year
  • Reduce consumption of oil in combustion
  • The engine startup becomes easy
  • Rust resistant effect

 

As a result of the state-of-the-art technology of Japan’s SUZUKA OIL , this product fulfills the standards of automotive manufacturers such as  TOYOTA, LEXUS, NISSAN, MAZDA, MITSUBISHI, HONDA, SUZUKI, SUBARU, DAIHATSU, HYUNDAI, KIA, etc.

Technical characteristics

Item Method Result
Viscosity grade SAE J300 10W-40
Density ASTM D-40520 8664
Flash point °C ASTM D-92 218
TBN (mg KOH/g) ASTM D-2896 7,50
Pour point °C ASTM D-97 -33
Color ASTM D-1500 <3,0
Viscosity index ASTM D-2270 159
Kinetic Viscosity 40°C (cSt) ASTM D-445 99,82
Kinetic Viscosity 100°C (cSt) ASTM D-445 15,30
suzuka-15w40-mineral-4l

SUZUKA 15W-40 MOTOR OIL SM/CF

Suzuka Motor Oil 15W-40 SM/CF is manufactured with highly purified base oil and high viscosity mineral oil used for the gasoline engine. In order to suppress the influence of aromatic hydrocarbon such as benzene contained in an unstable gasoline, this product is strengthened by the use of high quality detergents and dispersing additives. This product also contains high anti-oxidation properties. It also protects the engine in high-temperature environment.

Application

Suzuka Motor Oil 15W-40 SM/CF is intended for vehicles in high temperature climates which are prone to engine abrasion during warm seasons. This product satisfies current temperature standards for turbocharged direct injection and catalytic converters since 2005 ● It complies with the vehicle standards of the engine. It can also be used on an integrated gear box equipped in four-cycle motorcycles ● usage on engine is possible. Performance and environmental quality of this product have met the standards of JASO and API.

Specification/ Approval and authorization

Conformed standard

  • API SM/CF
  • JASO MA

Usage effect/result

SUZUKA 10W-40 Motor Oil SM/CF is high quality featuring the following characteristics.

  • Stable performance throughout the year
  • Reduce consumption of oil in combustion
  • The engine startup becomes easy
  • Rust resistant effect

 

As a result of the state-of-the-art technology of Japan’s SUZUKA OIL , this product fulfills the standards of automotive manufacturers such as  TOYOTA, LEXUS, NISSAN, MAZDA, MITSUBISHI, HONDA, SUZUKI, SUBARU, DAIHATSU, HYUNDAI, KIA, etc.

Technical characteristics

Item  Method  Result 
Viscosity grade SAE J300 15W-40
Density ASTM D-40520 8681
Flash point °C ASTM D-92 224
TBN (mg KOH/g) ASTM D-28967 7,50
Pour point °C ASTM D-97 -27
Color ASTM D-1500 <3,0
Viscosity index ASTM D-2270 148
Kinetic Viscosity 40°C (cSt) ASTM D-445 112,40
Kinetic Viscosity 100°C (cSt) ASTM D-445 15,66

SUZUKA PERFORMANCE DIESEL SYNTHETIC 15W-40 CJ-4/SM

Suzuka Performance Diesel 15W-40 CJ-4/SM Synthetic Blended is enhanced with high quality dispersing agent and additives strengthening the synthetic diesel oil. This product reduces the negative effects of sulphur and polycyclic hydrocarbons found in oil for vehicle use, and decreases the stress on many engines.

Application

15W-40 CJ-4 / SM Synthetic Blended is designed to last all year round in a diesel engine for long-distance driving trucks and road construction machineries. It is also recommended for diesel engines that run on high-sulphur fuel such as a bus, light trucks, or SUV. It also has high anti-oxidation performance. This product was manufactured with consideration on not only performance efficiency but also the environment standards that meets the most stringent requirements of global automotive manufacturers such as VOLVO.

Specification/ Approval and authorization

Conformed standard

  • API CJ-444/SM
  • ACEA A3/B4/E2/E5/E7
  • CUMMINS 20071/2/6/8
  • MACK EO-M, EO-M Plus
  • VOLVO VDS-3
  • MAN M3275
  • MERCEDES-BENZ 228.3, 229

Usage effect/result

SUZUKA Performance Diesel 15W-40 CJ-4/SM Synthetic Blended has the following features:

  • Stable oil film to protect the engine parts even in extreme load and severe operating conditions
  • Useful for long distance
  • Promptly start the engine even at a low temperature
  • Prevents rust from forming

As a result of the state-of-the-art technology of Japan’s SUZUKA OIL , this product fulfills the standards of automotive manufacturers such as  TOYOTA, NISSAN, MAZDA, MITSUBISHI, ISUZU, HYUNDAI, FORD, GM, VW, FIAT, VOLVO, AUDI, MERCEDES-BENZ etc.

Technical characteristics

Item Method Result
Viscosity grade SAE J300 15W-40
Density ASTM D-40520 8668
Flash point °C ASTM D-92 224
TBN (mg KOH/g) ASTM D-2896 10,00
Pour point °C ASTM D-97 -36
Color ASTM D-1500 <3,0
Viscosity index ASTM D-2270 155
Kinetic Viscosity 40°C (cSt) ASTM D-445 97,38
Kinetic Viscosity 100°C (cSt) ASTM D-445 14,58